Fanttik E1 Max Electric Screwdriver, Mini Precision Screwdriver Set, 50 Magnetic Bits, Magnetic Storage, 5/32‘’Hex, Repair Tool Kit for Electronics Phone Camera Laptop Watch (Grey)

Way more torque than expected!
I have done a few quick tests to see if this is up to my expectations, and wow it it exceed them. Its powerful, compact, has extended bits, and has a very quality feel.I was worried that the bits would not be long enough, its been a problem I have run into even with expensive 100+ piece kits the thin extended bits that this comes with are going to be lifesavers no doubt.I did a quick test disassembling a GameCube controller, it had the tri tip bit I needed and unscrewed everything under its own power. I also tested some flatheads on light sockets, no problem. it put them back tighter than they were by hand lol.honestly this this is a STEAL for 50$ I had my eyes on a cheaper one for a while but I’m SO glad I went with this instead. I likely wouldn’t have bought this at full price, but its a no brainer discounted.I only have a few small criticisms. because this thing is nearly perfect. my biggest issue is repairabilty, its why I got this in the first place. I work on LOTS electronics and gagets and 3d printers so being able to do something like replace the battery in the future would be a feature if it was truely perfect. I just remembered that it did my p1s hotend screws with a little effort, which was very nice, no more Allen keys!its possible that the aluminum tube chassis is removable, maybe it needs heat idk. its a problem for the future I guess. the only other thing I would change is really that I’d like more of these extended bits. They are just super nice and I’d like more sizes. oh if it had a bit of grip to it and maybe some texture on the buttons too, they can be a bit hard to find if you can’t see.I did test some of my bits from another kit, some of them fit a bit too snug others for fine. none that wouldn’t go in, but I had to wiggle them out.I included a video of trying to stop it by hand and it was pretty difficult. it really does have good torque. basically impossible to stop without a little more leverage (high torque setting in the video).I had held off on these for ages, as I had an “electric screwdriver” like 10-15 years ago that was so awful and thought they were all too weak and bulky to be useful. I expected this compact one to have so little torque it would be useless, the opposite is true it has plenty. it unironically has more torque than my brushed “electric screwdriver” I had ages ago, this was about 2.5in dia and 10in tall lol. the tech is there now, and the price is right. I’ve never jumped to give something a glowing review this fast before.

Great for tinkering
I’ve been using the Fanttik E1 Max for a couple of weeks on phones, laptops, and the odd controller repair. A few quick impressions if you’re thinking about it:What it actually does wellTwo simple modes: “Low” for delicate stuff, “High” for everything else. Even on High the torque tops out at about finger-tight, which is perfect for tiny brass standoffs and plastic shells.Bit selection that saves you internet scavenging: The 50-piece tray covers the usual Phillips and Torx plus the weird tri-wing and pentalobe bits you never have on hand until midnight strikes.Built-in light and magnet: The LED ring makes it easier to see tiny screws, and the magnetic bit holder stops them from swan-diving into the carpet.USB-C charging: Plug it in alongside your phone; no proprietary puck required. One charge lasted me through a laptop fan swap and two phone battery jobs.Where it comes up shortTorque ceiling: Don’t expect it to muscle out a stuck fan screw or bite into wood. If a screw is factory-tight, break it loose by hand first and let the motor take over once it’s moving.Speed difference feels small: Low vs. High is noticeable, but you won’t get a dramatic RPM jump—just enough to keep from overtightening soft plastics.Tips from a serial fiddlerStart on Low when you’re unsure; flip to High once you’ve gauged the thread.Keep a manual precision driver nearby. It’s faster to switch tools than to fight the motor when something’s stubborn.Use the magnetic tray lid as a parts corral. Saves hunting for screws later.Bottom line: If your projects live on a work mat and involve ribbon cables and tiny screws, this driver is a big quality-of-life upgrade. If you need brute force, grab a different tool—but for electronics, watches, and hobby builds, the E1 Max hits the sweet spot.

Très solide. Et très pratique. Bon pour le service.

パソコンをいじる時に重宝してます。収納できて、電動で機能的、かつ、デザインもいいので、満足しています。